
Product Details
Order a custom replacement cover for an in-ground spa, built to your measurements for concrete, plaster, or in-deck installations. Concrete or plaster spas are often ordered without a skirt. Select your cover shape, color, foam, and upgrades in the configurator below. Shipping is calculated by your ZIP code at checkout.
Custom In-Ground Hot Tub Covers Made for Built-In Spas
Our in-ground hot tub covers are made-to-order insulated foam-core covers for built-in spas. Each cover is built from the measurements and options you submit to fit a recessed or in-deck installation.
These in ground spa covers can suit a concrete or plaster opening, as well as an acrylic spa shell set into a deck or concrete surface. A properly fitted insulated cover helps limit heat loss, evaporation, leaves, and weather exposure between soaks.
How In-Ground Spa Covers Differ From Standard Above-Ground Covers
The basic construction of a replacement hot tub cover may be similar in both installations. An in-ground spa changes how the cover is measured, supported, secured, opened, and stored.
The Cover Must Rest Securely on the Coping or Deck
An above-ground acrylic spa usually has a raised rim that supports the cover. A concrete or plaster spa may have only coping or deck space around the opening, so the cover must be sized to rest on that finished surface.
The amount of support needed depends on the opening and surrounding deck. Use the measuring guidance below instead of assuming that your old cover has the right finished size.
In-Ground Covers Are Often Ordered Without a Skirt
A skirt is the fabric that hangs from the edge of a spa cover. Flush concrete or plaster installations often do not need a skirt because the cover rests directly on the coping or deck.
An acrylic shell set into a deck may still use a skirt. Measure from the top of the shell to the deck and make the skirt about ¼ inch shorter so it does not bunch against the deck or prevent the cover from seating correctly.
Fold Direction, Handles, and Storage Require Extra Planning
Plan the fold direction before you order your replacement in ground hot tub cover. The folded cover needs a clear path away from walls, rails, planters, and other deck features, and the handles must be easy to reach from the deck.
Thicker or denser foam can add useful insulation and support, but it also adds weight. Pick a clean, stable place to set the cover off the ground, and never drag it across concrete, lean it against sharp surfaces, or lift it by the skirt or straps.
If you want help moving the cover, confirm that the lifter’s mount type, size limits, and clearance requirements suit your installation. Undermount models generally need space beneath an above-ground spa, while the Cover Valet CV250 can mount directly to a deck and may suit some recessed setups. Contact support before ordering if compatibility is uncertain.
How to Measure an In-Ground Hot Tub for a Replacement Cover
Accurate measurements protect the fit, support, and everyday use of your new cover. Review our measuring tips before you submit an order, especially if the spa opening is recessed or has cut corners.
Concrete or Plaster Spas Without an Acrylic Rim
Measure the actual spa opening from one inside edge to the opposite inside edge. Then add at least 6–8 inches to the total length and width, which gives about 3–4 inches of supporting overlap on every side.
For example, a 70 × 80-inch opening would generally need a finished 78 × 88-inch cover. Those order dimensions describe the finished in ground spa cover, not only the water opening.
Inset Acrylic Spas Installed in a Deck
For an acrylic spa shell set into a deck, measure the full outside dimensions of the shell or rim. Do not use the interior water opening, because the cover needs to sit on and cover the acrylic rim correctly.
If you want a skirt, measure from the top of the shell to the deck. We recommend making the skirt about ¼ inch shorter than that distance so it does not bunch against the deck.
Irregular Shapes and Templates
Rounded corners, cut corners, and asymmetrical openings need more than a general shape name. We may need accurate dimensions and a physical template to make an irregularly shaped hot tub cover that rests and seals correctly.
Use the complete measuring instructions, then contact our support team for template mailing directions before you order. This step can prevent a poor fit on custom-shaped hot tub covers.
Choose the Right Cover Construction for Your Climate and Installation
The configurator lets you choose a foam height, foam density, material, and upgrades based on your climate, spa use, handling needs, and deck setup. Consider these factors together rather than relying on R-value alone.
Select a Foam Height
Available tapered foam heights include the 2–4-inch Basic, 3–5-inch Thick, and 4–6-inch Extra-Thick options. The taper helps rainwater run off, while a thicker option can provide greater insulation and support.
Foam thickness does not make this standard cover walk-on rated.
Select a Foam Density
We offer 1, 1.5, and 2-pound foam densities. Higher-density foam provides greater strength but also adds weight, which matters when lifting and storing an in-ground cover.
Choose Your Cover Material
Marine-grade vinyl is available in multiple colors and is treated with UV and mildew inhibitors. SpotHyde™ is available as a fabric upgrade that is 25% lighter and more resistant to tears, punctures and abrasion. Compare the available materials and other construction options in our spa cover features guide.
Consider Heat- and Moisture-Protection Upgrades
The Dual Extreme Vapor Barrier adds moisture protection around the foam, and a Full-Length Steam Stopper can help reduce heat loss along the hinge area. Every cover also includes a solid ThermaSeal liner as standard.
For handling, a reinforced hinge — standard on every cover — supports compatible cover-lifter use, and extra or rubber-grip handles may make a cover easier to manage from deck level. These upgrades serve different needs and do not guarantee a specific energy saving or service life.
Made-to-Order Production, Shipping, Returns, and Warranty
Every custom cover is made to your submitted specifications. Production usually takes about 3–5 weeks*, depending on demand (*subject to demand; it can be longer, and your order confirmation gives the current estimate); after shipment, transit usually takes about 1–4 weeks.
Shipping to the contiguous United States is calculated by your ZIP code at checkout; some remote, rural, or congested metropolitan destinations may incur additional charges. Alaska and Hawaii require an additional shipping quote. Covers cannot ship to PO boxes, so please review our shipping policy before ordering.
Custom covers are final sale and cannot be returned because we make them to your specifications. If there is a manufacturing issue, contact us promptly; our return policy and warranty explain the process, exclusions, and freight terms.
The limited warranty covers eligible defects in materials and workmanship for the original purchaser: five years for the cover skin and one year for the foam core. Exclusions and customer-paid freight terms apply, so review the complete warranty before ordering.
Complete Your In-Ground Spa Cover Setup
Add a Custom Cover Cap for Extra Outdoor Protection
A custom cover cap fits over the rigid spa cover and adds another layer against UV exposure, dirt, rain, and snow. It does not replace the insulated cover below it.
Add a Floating Spa Blanket for Heat Retention
Floating solar and thermal blankets rest on the water beneath the rigid cover. They may help reduce evaporation and heat loss while limiting direct chemical exposure to the cover’s underside. Choose a blanket that fits—or can be trimmed to—the spa’s water surface.
Frequently Asked Questions About In-Ground Hot Tub Covers
How much should an in-ground spa cover overlap the opening?
For concrete or plaster spas without an acrylic rim, we recommend about 3–4 inches of overlap on each side. That means adding roughly 6–8 inches to the total length and width of the opening.
Does an in-ground spa cover need a skirt?
Not always. Flush concrete or plaster installations are often ordered without a skirt, while an inset acrylic spa may use one sized from the shell-to-deck measurement.
Can you make a cover for an irregularly shaped in-ground spa?
Yes, we can make a cover for many irregular in-ground spa openings. Accurate dimensions and, in some cases, a physical template are required before production.
Is this a walk-on cover or a swimming-pool safety cover?
No. This standard product is neither a walk-on hot tub cover nor a swimming-pool safety cover, and it is not a substitute for barriers, supervision, or applicable safety requirements.
Do not walk, stand, or sit on the cover. Keep excessive rainwater, snow, and other weight off its surface to prevent damage.
Can I order an in-ground cover larger than 96 inches?
Yes, although covers over 96 inches in either direction are oversized and may cost more. Current pricing applies up to 105 inches with oversized charges where applicable; for a larger spa, use our Oversized Spa Cover Quote.
Shipping & Returns
Your cover ships by freight truck to the 48 contiguous states. Shipping is calculated by your ZIP at checkout and is always final. We never re-quote after you order.
In-Ground Hot Tub Covers
Starting from $524.99
Built for in-ground spas. We default to a 2″ skirt to match most in-ground installs, but every option — including skirt length — stays fully editable to match your exact setup.
Start your cover
This page is built for this size and shape — confirm or adjust your measurements in the next step.
- 1 Shape & Size
- 2 Performance Tier
- 3 Material & Color
- 4 Hardware & Upgrades
- 5 Review
Top view — updates as you choose
Not to scale. All dimensions should be entered as inches.
In-Ground Hot Tub Covers
Built for in-ground spas. We default to a 2″ skirt to match most in-ground installs, but every option — including skirt length — stays fully editable to match your exact setup.
Select your spa's shape
Hot tub make, model & year (optional)
Enter measurements
How to measureIt looks like you've selected a Square shape but entered rectangular dimensions. To ensure the correct process, please switch to the Rectangle shape before proceeding.
It looks like you've entered B as the longest side. Please swap the values so that A is the longest to ensure the correct spa cover configuration process.
Select handle style
Additional Handles (optional)
You will be contacted after your order is placed to provide a diagram/sketch of the desired locations for your extra handles.
Pick your performance tier
How cold do your winters get?
Thicker and denser means better insulation and longer life.
Choose foam density
Same taper, stiffer core – holds its shape under snow and resists sagging.
Select Material & Color
Choose Vinyl (15 colors) or upgrade to SpotHyde (5 colors)—25% lighter and more resistant to tears, punctures and abrasion.
Selected Color:
What's the difference?
A multi-layer woven fabric instead of standard vinyl: about 25% lighter to lift, roughly 3× the tear strength, breathable so trapped moisture escapes, and better UV resistance. The upgrade owners in full-sun and heavy-weather spots pick.
Upgrades & accessories
Choose your cover cap colour
Caps are made in SpotHyde fabric, to your cover's shape and size.
No colour chosen yet
The Extreme Weather Package is available on covers under 96".
Recommended for your winters Save 15%Extreme Weather Package
Built for snow, ice and hard winters. Five upgrades that work together to help keep heat in and weather out, bundled at 15% off.
Our densest foam core. More insulation and the most resistance to sagging through winter weather. $69.99
Doubles our standard 4 mil heat-sealed barrier to 8 mil, for extra protection against water soaking into the foam.$34.99
Seals the entire fold, not just the two ends, so less heat escapes along the hinge line. $34.99
A second skin over your cover that takes the sun, rain and snow. Built to your cover's size, with a 12" skirt and sewn-in bungee. 1-year warranty. $185
Holds your cover down when strong gusts hit. $49.99
Other companies sell these as add-ons. Ours are built in.
You save $56.24.
Add upgrades (optional)
Add accessories (optional)
Review your cover
Everything looks good? Confirm the details below, then head to checkout. You can edit any section before placing your order.
- Shape
- —
- Dimensions
- —
- Fold Direction
- —
- Skirt
- —
- Strap Length
- —
- Strap Placement
- —
- Tier
- —
- Material
- —
- Color
- —
- Handles
- —
- Upgrade
- —
Order summary
Built to order: production usually takes 3–5 weeks* (subject to demand; can be longer), then freight delivery to your door. We'll keep you posted the whole way.
Provide contact information
Tip: If your spa sits outdoors and winters dip below 30°F, step up to the 5" to 3" or 6" to 4" taper – more foam, more snow load, less heat lost.
Don't see your shape?
We build fully custom shapes too — speakers, handrails, ladder cut-outs, and anything else your spa needs. Reach out to our team with a photo and rough measurements and we'll quote it directly.
How to measure
Measure your spa from the outside edge of the cabinet, not the water line. Dimension A is the longer side (front-to-back), Dimension B is the shorter side (side-to-side), measured to the outer lip of the cabinet on each side.
If your spa has cut or rounded corners, Dimensions C/D capture those — see the corner-specific guide below.
Measuring corners
Many hot tubs have rounded or cut corners instead of sharp, square edges. Measuring these correctly is essential for a snug fit.
Use a straightedge (such as a ruler, yardstick, or stiff cardboard) and place it beyond the curve of the hot tub's corner.
WHERE THE STRAPS GO
The straps hold your cover down. They clip to the latches on the side of your hot tub. Pick the layout that matches where your latches are.
Black bars are straps, loops are handles, and the dashed line is the fold. Once you choose, the drawing of your cover shows your straps.
Skirt length
The skirt has one job: keeping the sun off your acrylic. UV is why so many spas wear a bleached band around the top.
So don't measure the skirt you have. Measure the skirt you need: from the bottom of your existing cover straight down to where the acrylic stops and the cabinet starts. If your current skirt is too short (usually why the acrylic faded), copying it re-orders the problem.
Strap length
Length: bottom edge of the cover down to your existing clip, not including the clip. Your strap should be at least 1.5" longer than your skirt so it reaches past the flap.
Note: due to production variations we cannot guarantee that the placement of our spa cover straps will align with your existing spa clip placement. Adjustments may be required to ensure a secure fit.
Foam thickness (taper)
4" to 2" Basic
5" to 3" Thick
6" to 4" Extra-Thick
centre of cover outer edge
What the taper does
Every cover is built thicker in the middle and thinner at the edge, like a roof, so rain and melting snow run off the sides instead of pooling in the centre.
4" to 2" Basic
Our standard taper.
5" to 3" Thick
More foam throughout. Worth considering if you see real snow load.
6" to 4" Extra-Thick
The most foam we build. Heaviest to lift — pair it with a cover lift.
Profiles shown to scale relative to each other, not to scale against cover width.
What foam density means
Density is the weight of a cubic foot of the foam core. Denser foam is stiffer, so it holds its shape and resists sagging for longer.
1 lb
Our standard core.
1.5 lb
A stiffer core. A good middle choice if the cover gets walked on by snow load or animals.
2 lb
The stiffest core we offer, and the heaviest.
Density and taper are separate choices — you can pair any density with any taper.
Two Additional Handles
Located anywhere you would like! You will be contacted after your order is placed to provide a diagram/sketch of the desired locations for your extra handles
Gazebo Handles
Interior gazebo handles for easy cover movement in tight spaces
Dual Extreme Vapor Barrier
Full-length steam stopper
Cover Lift Plates
Split-Corner Skirt
Panels meet at each corner so the skirt will not bunch or catch when closing
How handle style works
Handles are stitched into the same seam as your cover's skirt, positioned at the fold so the cover is easy to lift and fold back for access. Standard Handles are included on every cover; Rubber Handgrips add a molded rubber grip over the handle for a slip-free hold in wet conditions.
Shipping information
Your cover ships by freight truck to the 48 contiguous states. Shipping is calculated by your ZIP at checkout and is always final. We never re-quote after you order.
Got an unusual spa? We'll build it.
Custom shape, oversized, antique, or one-of-a-kind tub? Our build team handles it. Send us your measurements and photos and our team will quote it.
The difference
What you get with every HTCS cover
The parts that make a cover last, included as standard.
Have Questions?
Everything you need to know about ordering your custom Premium Spa Cover.
Still have questions?
Our team is available to help you measure, configure, and choose the right cover for your spa. Email us on support@hottubcoverspot.com.
How do I measure my hot tub for a custom cover?
Measure the full length and width of your spa (outside edge to outside edge). If you have rounded corners, we'll also need the corner radius — there's a printable radius template on the order page that makes it foolproof. Not sure? Send us a photo and we'll help you measure. Free.
I have an odd-shaped spa. Can you build it?
Absolutely. We build covers for circles, squares, rounded squares, octagons, hexagons, rectangles with radius corners, and fully custom shapes. If you have an unusual spa or an older model, contact our team and we'll work with you to capture the exact shape needed.
How long does shipping really take?
Built to order: production usually takes 3–5 weeks* (subject to demand; can be longer), then freight delivery to your door.
What foam taper and density should I choose?
We recommend our 4"/2" tapered foam for most climates. For colder climates or the most energy savings, our 5"/3" option adds more insulation. Our team can recommend the ideal thickness for your climate and how you use your spa.
Do you offer a warranty?
Yes. Every cover includes our 5-Year Warranty covering defects in materials and workmanship, including vinyl tearing, foam deterioration, stitching failure, and hardware malfunction.
What color options do you offer?
We offer 15 marine-vinyl colors and 5 SpotHyde™ colors – see them all in the builder.
How much is shipping?
Shipping is calculated by your ZIP code at checkout and shown before you pay. Your cover ships by freight truck to the 48 contiguous states. Some remote or rural addresses may need a freight quote, which we'll confirm with you before processing your order. Expedited shipping options are also available at checkout.
─ Ready to Order? ─
Your cover is custom-built to order. Shipping will be calculated at checkout.