
Product Details
Your last cover didn't fail from the outside. It broke down from internal moisture, and once that starts, the cycle repeats. Every time your spa heats up, steam and chemical vapor rise off the water and work their way into the insulation. Once the foam absorbs moisture it gets heavier, loses structure, and stops insulating. Heat escapes, the center sags, and you're shopping for a replacement in 18 months.
Most covers aren't built to prevent that internal breakdown. Ours are. The vapor barrier is heat-sealed directly to the foam core, so moisture can't creep in at the seams, and the cover liner is chemically treated on both sides to stand up to the vapor coming off your water. We stop the failure where it actually starts, inside the cover. And because every cover is custom-cut to your exact spa, it seals tight on day one and stays that way.
The result: a cover that stays lighter, holds its insulation, keeps your heat sealed in, and lowers your energy bill. Built to order in the USA from heavy marine-grade vinyl and energy-efficient tapered foam, so you get the right fit the first time.
All backed by a 5 year warranty.
Specs & Features
- 4 mil vapor barrier, heat-sealed to the foam core (8 mil dual barrier available)
- Energy-efficient virgin EPS tapered foam — 1, 1.5 and 2 lb densities
- 28 oz heavy-weight marine-grade vinyl with mildew inhibitors and UV-stabilized color
- Double-sided cover liner, chemically treated on both sides
- 2″ galvanized steel support beams — chemical resistant
- UV inhibitors in vinyl and thread
- Two reinforced vinyl handles
- Child-locking tie-downs, double stitched
- Steam stoppers
- Expert double stitching
- Cut and sewn in the USA
- Available in 15 colors
- SpotHyde™ fabric available — 25% lighter, with superior resistance to tears, punctures and abrasion
- 5 year warranty
Made to order · Quick build and ship
Shipping & Returns
Custom covers ship by freight truck to the 48 contiguous states. Shipping is calculated by your ZIP at checkout, and the final price is shown before you pay.
You will NOT be contacted for any further shipping or other costs.
94×94 Hot Tub Cover
Starting from $524.99
If your spa needs a 94×94 cover, start with a build that's made to fit. Use the configurator to confirm your exact measurements, then choose insulation thickness, foam density, and moisture-protection upgrades to keep heat in and help prevent waterlogged foam over time.
Start your cover
This page is built for this size and shape — confirm or adjust your measurements in the next step.
- 1 Shape & Size
- 2 Performance Tier
- 3 Material & Color
- 4 Hardware & Upgrades
- 5 Review
Top view — updates as you choose
Not to scale. All dimensions should be entered as inches.
94×94 Hot Tub Cover
If your spa needs a 94×94 cover, start with a build that's made to fit. Use the configurator to confirm your exact measurements, then choose insulation thickness, foam density, and moisture-protection upgrades to keep heat in and help prevent waterlogged foam over time.
Select your spa's shape
Hot tub make, model & year (optional)
Enter measurements
How to measureIt looks like you've selected a Square shape but entered rectangular dimensions. To ensure the correct process, please switch to the Rectangle shape before proceeding.
It looks like you've entered B as the longest side. Please swap the values so that A is the longest to ensure the correct spa cover configuration process.
Select handle style
Additional Handles (optional)
You will be contacted after your order is placed to provide a diagram/sketch of the desired locations for your extra handles.
Pick your performance tier
How cold do your winters get?
Thicker and denser means better insulation and longer life.
Choose foam density
Same taper, stiffer core – holds its shape under snow and resists sagging.
Select Material & Color
Choose Vinyl (15 colors) or upgrade to SpotHyde (5 colors)—25% lighter and more resistant to tears, punctures and abrasion.
Selected Color:
What's the difference?
A multi-layer woven fabric instead of standard vinyl: about 25% lighter to lift, roughly 3× the tear strength, breathable so trapped moisture escapes, and better UV resistance. The upgrade owners in full-sun and heavy-weather spots pick.
Upgrades & accessories
Choose your cover cap colour
Caps are made in SpotHyde fabric, to your cover's shape and size.
No colour chosen yet
The Extreme Weather Package is available on covers under 96".
Recommended for your winters Save 15%Extreme Weather Package
Built for snow, ice and hard winters. Five upgrades that work together to help keep heat in and weather out, bundled at 15% off.
Our densest foam core. More insulation and the most resistance to sagging through winter weather. $69.99
Doubles our standard 4 mil heat-sealed barrier to 8 mil, for extra protection against water soaking into the foam.$34.99
Seals the entire fold, not just the two ends, so less heat escapes along the hinge line. $34.99
A second skin over your cover that takes the sun, rain and snow. Built to your cover's size, with a 12" skirt and sewn-in bungee. 1-year warranty. $185
Holds your cover down when strong gusts hit. $49.99
Other companies sell these as add-ons. Ours are built in.
You save $56.24.
Add upgrades (optional)
Add accessories (optional)
Review your cover
Everything looks good? Confirm the details below, then head to checkout. You can edit any section before placing your order.
- Shape
- —
- Dimensions
- —
- Fold Direction
- —
- Skirt
- —
- Strap Length
- —
- Strap Placement
- —
- Tier
- —
- Material
- —
- Color
- —
- Handles
- —
- Upgrade
- —
Order summary
Built to order: production usually takes 3–5 weeks* (subject to demand; can be longer), then freight delivery to your door. We'll keep you posted the whole way.
Provide contact information
Tip: If your spa sits outdoors and winters dip below 30°F, step up to the 5" to 3" or 6" to 4" taper – more foam, more snow load, less heat lost.
Don't see your shape?
We build fully custom shapes too — speakers, handrails, ladder cut-outs, and anything else your spa needs. Reach out to our team with a photo and rough measurements and we'll quote it directly.
How to measure
Measure your spa from the outside edge of the cabinet, not the water line. Dimension A is the longer side (front-to-back), Dimension B is the shorter side (side-to-side), measured to the outer lip of the cabinet on each side.
If your spa has cut or rounded corners, Dimensions C/D capture those — see the corner-specific guide below.
Measuring corners
Many hot tubs have rounded or cut corners instead of sharp, square edges. Measuring these correctly is essential for a snug fit.
Use a straightedge (such as a ruler, yardstick, or stiff cardboard) and place it beyond the curve of the hot tub's corner.
WHERE THE STRAPS GO
The straps hold your cover down. They clip to the latches on the side of your hot tub. Pick the layout that matches where your latches are.
Black bars are straps, loops are handles, and the dashed line is the fold. Once you choose, the drawing of your cover shows your straps.
Skirt length
The skirt has one job: keeping the sun off your acrylic. UV is why so many spas wear a bleached band around the top.
So don't measure the skirt you have. Measure the skirt you need: from the bottom of your existing cover straight down to where the acrylic stops and the cabinet starts. If your current skirt is too short (usually why the acrylic faded), copying it re-orders the problem.
Strap length
Length: bottom edge of the cover down to your existing clip, not including the clip. Your strap should be at least 1.5" longer than your skirt so it reaches past the flap.
Note: due to production variations we cannot guarantee that the placement of our spa cover straps will align with your existing spa clip placement. Adjustments may be required to ensure a secure fit.
Foam thickness (taper)
4" to 2" Basic
5" to 3" Thick
6" to 4" Extra-Thick
centre of cover outer edge
What the taper does
Every cover is built thicker in the middle and thinner at the edge, like a roof, so rain and melting snow run off the sides instead of pooling in the centre.
4" to 2" Basic
Our standard taper.
5" to 3" Thick
More foam throughout. Worth considering if you see real snow load.
6" to 4" Extra-Thick
The most foam we build. Heaviest to lift — pair it with a cover lift.
Profiles shown to scale relative to each other, not to scale against cover width.
What foam density means
Density is the weight of a cubic foot of the foam core. Denser foam is stiffer, so it holds its shape and resists sagging for longer.
1 lb
Our standard core.
1.5 lb
A stiffer core. A good middle choice if the cover gets walked on by snow load or animals.
2 lb
The stiffest core we offer, and the heaviest.
Density and taper are separate choices — you can pair any density with any taper.
Two Additional Handles
Located anywhere you would like! You will be contacted after your order is placed to provide a diagram/sketch of the desired locations for your extra handles
Gazebo Handles
Interior gazebo handles for easy cover movement in tight spaces
Dual Extreme Vapor Barrier
Full-length steam stopper
Cover Lift Plates
Split-Corner Skirt
Panels meet at each corner so the skirt will not bunch or catch when closing
How handle style works
Handles are stitched into the same seam as your cover's skirt, positioned at the fold so the cover is easy to lift and fold back for access. Standard Handles are included on every cover; Rubber Handgrips add a molded rubber grip over the handle for a slip-free hold in wet conditions.
Shipping information
Custom covers ship by freight truck to the 48 contiguous states. Shipping is calculated by your ZIP at checkout, and the final price is shown before you pay.
You will NOT be contacted for any further shipping or other costs.
Got an unusual spa? We'll build it.
Custom shape, oversized, antique, or one-of-a-kind tub? Our build team handles it. Send us your measurements and photos and our team will quote it.
The difference
What you get with every HTCS cover
The parts that make a cover last, included as standard.
Have Questions?
Everything you need to know about ordering your custom Premium Spa Cover.
Still have questions?
Our team is available to help you measure, configure, and choose the right cover for your spa. Email us on support@hottubcoverspot.com.
How do I measure my hot tub for a custom cover?
Measure the full length and width of your spa (outside edge to outside edge). If you have rounded corners, we'll also need the corner radius — there's a printable radius template on the order page that makes it foolproof. Not sure? Send us a photo and we'll help you measure. Free.
I have an odd-shaped spa. Can you build it?
Absolutely. We build covers for circles, squares, rounded squares, octagons, hexagons, rectangles with radius corners, and fully custom shapes. If you have an unusual spa or an older model, contact our team and we'll work with you to capture the exact shape needed.
How long does shipping really take?
Built to order: production usually takes 3–5 weeks* (subject to demand; can be longer), then freight delivery to your door.
What foam taper and density should I choose?
We recommend our 4"/2" tapered foam for most climates. For colder climates or the most energy savings, our 5"/3" option adds more insulation. Our team can recommend the ideal thickness for your climate and how you use your spa.
Do you offer a warranty?
Yes. Every cover includes our 5-Year Warranty covering defects in materials and workmanship, including vinyl tearing, foam deterioration, stitching failure, and hardware malfunction.
What color options do you offer?
We offer 15 marine-vinyl colors and 5 SpotHyde™ colors – see them all in the builder.
How much is shipping?
Shipping is calculated by your ZIP code at checkout and shown before you pay. Your cover ships by freight truck to the 48 contiguous states. Some remote or rural addresses may need a freight quote, which we'll confirm with you before processing your order. Expedited shipping options are also available at checkout.
─ Ready to Order? ─
Your cover is custom-built to order. Shipping will be calculated at checkout.